Radxa Wiki惠阳保姆13825404095

中文（中国大陆）‎

español

Deutsch

português do Brasil

Radxa CM 5

Radxa CM5 is a series System-on-Module based on the RK3588/RK3588S, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK5 software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK5 boards, opening up more options for the designer.

CM5, compatible with Radxa CM3 and Raspberry Pi CM4 in pinout and form factor

NX5, compatible with Nvidia Jetson Nano / TX2 NX / XAVIER NX, SODIMM form factor

Specification Raspberry Pi CM4 Radxa CM3(In production) Radxa CM5(Coming soon)
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz   Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz   Rockchip RK3588S, Quad core Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz + Quad core Cortex-A55 64-bit SoC @ 1.8GHz  
Small Footprint 55mm × 40mm × 4.7mm module   Small Footprint 55mm × 40mm × 4.7mm module   Small Footprint 55mm × 40mm × 4.7mm module  
Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC   Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC   Options for 4GB or 8GB or 16GB LPDDR4x-4224 SDRAM  
Options for 0GB (CM4Lite), 8GB, 16GB, or 32GB eMMC Flash memory, Peak eMMC bandwidth 100MBytes/s   Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth 250MBytes/s   Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth 250MBytes/s  
Option for WiFi5/BT5   Option for WiFi5/BT5   None  
Gigabit Ethernet PHY supporting IEEE 1588   Gigabit Ethernet PHY(RTL8211F), optional IEEE 1588 support   1x GMAC, without phy on SoM  
1 × USB 2.0 port ( highspeed )   1 x USB 2.0 port ( highspeed ), 1 x USB 3.0 port (5Gbps)   1 x USB 2.0 port, 1 x USB C 3.1 port (5Gbps), 1x USB 3.0 host port  
1 × PCIe 1-lane Host, Gen 2 ( 5Gbps )   1 x PCIe 1-lane Host, Gen 2 ( 5Gbps )   2 x PCIe 1-lan host, Gen 2.1 (5Gbps)  
N/A   2 x SATA ports, one shared with USB 3, one shared with PCIe   2 x SATA ports, one shared with USB 3, one shared with PCIe  
2 x HDMI 2.0(up to 4K60)   1 x HDMI(up to 4K60)   1 x HDMI(up to 8K60)  
MIPI DSI:
- 1 × 2-lane MIPI DSI display port
- 1 × 4-lane MIPI DSI display port   MIPI DSI:
- 2 × 4-lane MIPI DSI display port(MIPI DSI0, MIPI DSI1)
- 1 x 4-lane LVDS support(shared with MIPI DSI0)   MIPI DSI:
- 2 × 4-lane MIPI DSI display port(MIPI DSI0, MIPI DSI1)  
  eDP:
- 1 x eDP up to 4K60   eDP:
- 1 x eDP up to 8K60(shared with HDMI)  
MIPI CSI-2:
- 1 × 2-lane MIPI CSI camera port
- 1 × 4-lane MIPI CSI camera port   MIPI CSI-2:
- 1 × 2-lane MIPI CSI camera port
- 1 × 4-lane MIPI CSI camera port   MIPI CSI-2:
- 1 × 2-lane MIPI CSI camera port
- 1 × 4-lane MIPI CSI camera port  
1 × SDIO 2.0 (CM4Lite only)   1 x SDIO 3.0   1 x SDIO 3.0  
N/A   Audio Codec    
28 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:
- Up to 5 × UART
- Up to 5 × I2C
- Up to 5 × SPI
- 1 × SDIO interface
- 1 × DPI (Parallel RGB Display)
- 1 × PCM Up to
- 2× PWM channels
- Up to 3× GPCLK outputs   50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:
- Up to 8 × UART
- Up to 8 × I2C
- Up to 4 × SPI
- 1 × SDIO interface
- 1 × PCM
- Up to 8 × PWM channels
- 2 x ADC   50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:
- Up to 8 × UART
- Up to 8 × I2C
- Up to 4 × SPI
- 1 × SDIO interface
- 1 × PCM
- Up to 8 × PWM channels
- 2 x ADC  
Single +5v PSU input   Single +5v PSU input   Single +5v PSU input  
2 x 100Pin B2B connector   3 x 100Pin B2B connector   3 x 100Pin B2B connector  

For more information, please Contact Us.